UPS able
1
Enlarge Image

RUST-OLEUM CORPORATION

BIN Shellac-Base Interior and Spot Exterior Primer, Flat White, 1 gal Bucket/Pail, 2/Carton

  • Product Type : 
  • Item # :  RST320991CT

  • Stock Check

Quick Overview

  • The original shellac primer/sealer—trusted for decades.
  • High-hiding formula covers even the most stubborn and persistent stains.
  • Seals porous surfaces with excellent enamel holdout.
  • Permanently blocks most every kind of odor.
  • Excellent adhesion to all, even glossy, surfaces—no scuff sanding required.
  • Dried film is non-toxic and hypo-allergenic.
  • Can be applied in freezing temperatures.

$179.99/Carton

 
Qty: Add to Cart
 

General Information

Manufacturer
RUST-OLEUM CORPORATION
Manufacturer Part Number
320991CT
Global Product Type
Building/Construction Paints & Primers
Paint Sub-Category
Primer, Shellac-Based
Intended Application Environment
Interior/Exterior
Finish/Sheen
Flat
Color(s)
White
Color Family
White
Volume Capacity
1 gal
Packaging Type
Bucket/Pail
Binder/Vehicle Ingredient(s)
Shellac
Diluent/Solvent Ingredient(s)
Denatured Alcohol; Water
Application Method
Brush; Roller
Recommended Level of Ventilation
Moderate
Application Temperature Range
0º and 90ºF
Applicable Surface Material
Cement; Concrete; Drywall; Glass/Ceramics; Masonry; Metal; Plaster; Plastic; Wood
Maximum Coverage Area
500 sq ft
Cure/Dry-Time Range
20 min (Touch); 45 min (Handle, Re-Coat); 1-3 Days (Full Cure)
Age Recommendation
Ages 16 and Up
Product Biodegradability Indicator
N
Product Biodegradability in Days
0
Product Compostability Indicator
N
Pre-Consumer Recycled Content Percent
0%
Post-Consumer Recycled Content Percent
0%
Total Recycled Content Percent
0%
Disclaimer Statement
B-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are between 0 and 90ºF (-18 and 32ºC) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN.
Footnote 1
Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils
Footnote 2
Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils
Country of Origin
US
 

© 2024-2025 LOP Office Supply, All Rights Reserved