General Information
Manufacturer
RUST-OLEUM CORPORATION
Manufacturer Part Number
375642
Global Product Type
Building/Construction Paints & Primers
Paint Sub-Category
Epoxy; Water-Based
Intended Application Environment
Interior/Exterior
Packaging Type
Bucket/Pail
Binder/Vehicle Ingredient(s)
Modified Urethane Latex Epoxy
Diluent/Solvent Ingredient(s)
Glycol Ether; Water
Application Method
Brush; Roller
Application Temperature Range
50 to 90 F
Applicable Surface Material
Cement/Concrete; Drywall; Masonry; Metal; Plaster; Wood
Maximum Coverage Area
155 to 330 sq ft
Cure/Dry-Time Range
15 min (Touch); 45 min (Handle); 2 h (Recoat); 24 h (Light Foot Traffic); 3 days (Vehicle Traffic); 7 days (Full Cure)
Age Recommendation
Ages 16 and Up
Product Biodegradability Indicator
N
Product Biodegradability in Days
0
Product Compostability Indicator
N
Compliance Standards
USDA FSIS Regulatory Sanitation Performance Compliant; VOC Compliant
Pre-Consumer Recycled Content Percent
0%
Post-Consumer Recycled Content Percent
0%
Total Recycled Content Percent
0%
Disclaimer Statement
For best results, apply within the recommended Application Temperature Range (50 to 90 F) when the surface temperature is also at least 5 F (3 C) above the dew point and the relative humidity is not greater than 85%.
Footnote 1
Recommended Dry Film Thickness (DFT) Per Coat: 1.5 to 2.5 mil
Footnote 2
Recommended Wet Film Thickness to Achieve DFT: 4 to 7 mil