General Information
Manufacturer
RUST-OLEUM CORPORATION
Manufacturer Part Number
276049CT
Global Product Type
Building/Construction Paints & Primers
Paint Sub-Category
Primer; Water-Based
Intended Application Environment
Interior/Exterior
Packaging Type
Bucket/Pail
Binder/Vehicle Ingredient(s)
Styrene Acrylic
Diluent/Solvent Ingredient(s)
Ethylene Glycol; Water
Pigment/Dye/Filler Ingredient(s)
Calcium Carbonate
Application Method
Brush; Roller
Recommended Level of Ventilation
Moderate
Application Temperature Range
50 to 80 F
Applicable Surface Material
Cement/Concrete; Drywall; Glass/Ceramics; Masonry; Metal; Plaster; Plastic; Wood
Maximum Coverage Area
400 to 450 sq ft
Cure/Dry-Time Range
30 min (Touch); 1 h (Handle/Recoat); 7 days (Full Cure)
Age Recommendation
Ages 16 and Up
Product Biodegradability Indicator
N
Product Biodegradability in Days
0
Product Compostability Indicator
N
Compliance Standards
EPA Reg. No. 87469-1-69587
Pre-Consumer Recycled Content Percent
0%
Post-Consumer Recycled Content Percent
0%
Total Recycled Content Percent
0%
Disclaimer Statement
Do not apply when air or surface temperatures are below 50 F (10 C) or when drying conditions are poor. Not recommended for new or unpainted metal and vinyl siding or for floors, decks and other surfaces subjected to full-immersion and/or prolonged contact with water. For optimal protection, apply topcoat product within 72 hours.
Footnote 1
Recommended Dry Film Thickness (DFT) Per Coat: 1 to 2 mil
Footnote 2
Recommended Wet Film Thickness to Achieve DFT: 2.5 to 5 mil